Vendors for my project

[rrTor-Red]

Have a 71 RR, vinyl roof, etc, etc. Looking for vendors for the following and or suggestions of good quality vendors:

1. Weather strip- Who? Sponsor here on FBBO-Just Mopar or?

2. Vinyl roof- looking for the 3/4 as correct as possible

3. Engine- Thinking of getting a new 440 siamese block to have it stroked. Looking for a good engine builder who IS either Mopar specific or has built quite a few Mopr engines and knows what they are doing. Good customer relation and service is always good. Least that way, I can expect what I'm getting and paying for with no surprises.- like Hughes engines, Marsh performance?

Side note on this one but needing advice:
Want to put torque boxes and frame connectors on my car. Should I have these put on prior to taking the rear end and k-member off?

This is a car that has been in my family for 27 years now. This car has NO rust on it, really.

All comments are appreciated, thanks!

 

[RRGTX72]

Have a 71 RR, vinyl roof, etc, etc. Looking for vendors for the following and or suggestions of good quality vendors:

1. Weather strip- Who? Sponsor here on FBBO-Just Mopar or?
http://www.jacksautoparts.com/

2. Vinyl roof- looking for the 3/4 as correct as possible
I would go with Legendary Interiors: http://www.legendaryautointeriors.com/

3. Engine- Thinking of getting a new 440 siamese block to have it stroked. Looking for a good engine builder who IS either Mopar specific or has built quite a few Mopr engines and knows what they are doing. Good customer relation and service is always good. Least that way, I can expect what I'm getting and paying for with no surprises.- like Hughes engines, Marsh performance?

Side note on this one but needing advice:
Want to put torque boxes and frame connectors on my car. Should I have these put on prior to taking the rear end and k-member off?

This is a car that has been in my family for 27 years now. This car has NO rust on it, really.

All comments are appreciated, thanks!

Sorry couldn't help with the others, but hopefully it's a start. Good luck on the build. Would love to see pics.

 

[rrTor-Red]

Thanks GTXRR72. The car is about 90% disassembled right now. Going to take it the rest of the way down. I'll get pix posted A.S.A.P when I get home in July. Currently out of the country and have missed my old girl much....Its a love affair