WTB Wanted: 3.55 gears for 741 case.

[Jason440]

Hello I'm looking for a set of 3.55 gears for a 741 8-3/4" rear differential. 3.23 or 3.91 would work too.
Thank you

 

[j-c-c-62]

 

[YY1]

3.55 was fairly common in "A" series trucks and vans with a six cyl.

 

[Jason440]

If they were ever made or avalible other than 3.23, I suspect they might be rare and maybe pricey?
Have considered just acquiring an already built/operating 742 that are becoming a dime a dozen in nearly every flavor and saving a lot of hassle and maybe money?

I already have a 741 sure grip someone swapped in with 2.76 gears. I don't have a problem installing a 3.55 gear set. I've messed with them several times. In my opinion, people ask crazy prices for complete working units.

 

[Project66]

It looks like Dr. Diff has some...
eBay Listing

 

[BearDodge67]

For the OP.. try Yukon Gear if you can't find a good OEM set. They still sell them in 3.55 and 3.73 for the 41 case. Richmond stopped carrying any gears for that case awhile ago.

 

[j-c-c-62]

It looks like Dr. Diff has some...
eBay Listing

Read the ebay listing link above for yourself, I quoted it here, but my exact Dr Diff quote got deleted. Go figure

 

[BearDodge67]

It looks like Dr. Diff has some...
eBay Listing

This kind of blows his theory out of water.. it's for 10 spline yokes, not 26 spline that OP most likely has.

And if you think this is just Dr Diff trolling.. all I need to do is bleed and back on road from him. All I supplied was fluid and bearing grease.

 

[RemCharger]

Get a new yoke if required

 

[Dako]

I have a used set. They came out of a 741 case. PM me a fair offer.

Bill