• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WANTED: 69 Neutral Safety Switch pigtail/connector, 3-prong

Status
Not open for further replies.

eagleone1983

Well-Known Member
Local time
9:57 PM
Joined
May 8, 2009
Messages
1,414
Reaction score
355
Location
utah
Feedback: 0 / 0 / 0
Does anybody have a good new or used three prong pigtail I get get off you. I've been calling the local dealers and they don't have them in stock plus they want $53 plus shipping for it. The one I have on the car now is an aftermarket pigtail and keeps slipping off and is made of a hard plastic. I think they are supposed to be rubber so they seal and fit tight. Shipping to 84067, thanks.
 
You can get just the pigtail from rock auto for like $17 and just splice it into your existing nss harness. I purchased mine from rock and made my own oem type harness for like $25 total including the oem type connectors. Like you said, it's a softer rubber and forms a seal on my nss. It's listed under electrical connectors.
 
I saw that one on Rockauto but it looked just like the one I already have and thought it would be the hard plastic again but it sounds like that isn't the case so I'll get that one from Rockauto, thanks guys.
 
They all start out soft rubber but after 1000's of heat cycles rubber gets hard.
 
That could be the case but it looks and feels like hard plastic. It's even shiny like hard plastic. Either way I found one through our local Autozone and should be here by 3. Thanks again guys
 
Status
Not open for further replies.
Auto Transport Service
Back
Top