Water pump inlets for Mopar Big Block...(B/RB) on a Hemi

[super-bee_ski]

I'm looking for a "NEW" inlet water nipples for the Hemi (For B/RB water pump housing)

Kit 1 from Year One has a small inlet: 7/16ths with a small thread.

Kit 2 from Mancinni Racing has a 9/16ths size with the standard 3/8ths NPT thread.
But: This inlet will not fit the smaller diameter hose to firewall.

The inlet I'm searching for is in picture 2 and picture 4. It is in rough condition, cast, not Aluminumn. It is 3" long and 1/2" O.D for the smaller hose.

Notice Mancinni Racings' kit has a "SHORT" inlet, again 9/16ths. I will use that but I need a 3" one with 1/2" O.D for smaller hose.

Does anybody manufacture this item new?

"Super-bee_ski"

 

[moparmarks]

Did you try R/T?
Might also try Bill Allphin
http://amhightechauto.com

 

[super-bee_ski]

Did you try R/T?
Might also try Bill Allphin
http://amhightechauto.com

Will do...
I'll post outcome.

- - - Updated - - -

Will do...
I'll post outcome.

Tried Bill,
I might have to call him and talk to him.

 

[moparmarks]

Bill is a great guy and has a good attention to details such as this.

 

[super-bee_ski]

Yup,
I JUST sent him an e-mail
Thanks!