wiring help

[godfatherofchry]

not sure how to word this but here goes,i'm putting a tilt steering column from a 71 charger in to my 66 coronet convertible its in and looking good.but now I need to hook the turn signals up using the 71 wiring in the column for the turn signels. because the one out of the 66 isn't even close.what In need to know is the color of the wires for both I have looked on the computer and cant get any thing show big enough to see.I just need the color of the left&right for both signals. I know which ones are for horn.this would save me a lot of trouble.Thanks for any help on this......Artie

 

[Pops1967GTX]

try these sites

http://www.autowiringmanual.com/wp-content/uploads/2011/07/66-Dodge-Charger-Wiring-Diagram2.jpg

http://img.photobucket.com/albums/v517/DynoDave/Charger/72SteeringColumnDiagram002.jpg

http://www.autowiringmanual.com/wp-content/uploads/2011/08/1971-Dodge-Coronet-Charger-Schematic1.jpg

http://wwnboa.org/turnsignalswitch.htm

 

[72RoadrunnerGTX]

You will need rewire the lighting in the 66’ to match the 71-74’, including the addition of the 4-way flasher. Here’s diagram from the 72’ FSM.

 

[godfatherofchry]

thank you thank you.I got it all hooked up and working good.now I have a tilt wheel in my 66 out of a 71 and looks like factory.thanks again to both of you......Artie