rescuediver1982
Well-Known Member
A note on the Hot wire harness. Not sure if you specified a location for the fly by wire location when you ordered the harness. If you are using the truck bell crank like I did, the fly by wire plug needs to be under the hood. Otherwise I believe they locate it under the dash. With the factory A/C, there is no room for that pedal assembly. At least on my 68.
I got the whole kit from a guy who never began his swap, so I'm not exactly sure. I assume it is for the pedal assembly. I am going to try and see how much room I have when I get off work tonight. Is it the same plug, like would I just need to extend the wires to reroute it if I went the bell crank route?