Average Joe
Well-Known Member
Good morning Mopar enthusiasts,I wanted to share my pro touring truck build.
I am building a 1966 Dodge D-100 Sweptline.
So far what I have done is replace the front leaf springs with a front clip from a Crown Victoria,in the process of boxing the frame and adding a four link suspension.
The pictures I have are not that great but as I start getting going again I will have better photos to share.I am in the process of finishing the Engine.
So the drive train is going to be a 6BT 12 valve Cummins Turbo diesel.1993 block,head and rotating assembly,913 P-7100 CPP hot street built injection pump,hamiltons cam,Diesel Power Source 62/75 Compound turbo kit.4L80E Four speed transmission.Dana 60 out of a 88 Dodge 3/4 ton that I cut down and put 8-3/4 housing ends on.I am hoping to do about 550 HP and around 950 lb/ft. of torque.
I am building a 1966 Dodge D-100 Sweptline.
So far what I have done is replace the front leaf springs with a front clip from a Crown Victoria,in the process of boxing the frame and adding a four link suspension.
The pictures I have are not that great but as I start getting going again I will have better photos to share.I am in the process of finishing the Engine.
So the drive train is going to be a 6BT 12 valve Cummins Turbo diesel.1993 block,head and rotating assembly,913 P-7100 CPP hot street built injection pump,hamiltons cam,Diesel Power Source 62/75 Compound turbo kit.4L80E Four speed transmission.Dana 60 out of a 88 Dodge 3/4 ton that I cut down and put 8-3/4 housing ends on.I am hoping to do about 550 HP and around 950 lb/ft. of torque.