Big Block Push Rods (3) sets different lenghts

[moparguy1966]

Used RB Big Block Push Rods

set # 1
3/8"
8.94 length
Ball and Cup

Set #2
3/8"
9.18 length
Ball and Cup

Set # 3
3/8"
9.13 length
Ball and Cup




$55.00 ea set of 16
shipped to the lower 48 states
or $145.00 for all 3 set shipped to the lower 48 states.

USPS money order or paypal (add 2%) accepted for payment

located in Frederick, MD 21701

 

[moparguy1966]

bump

 

[moparguy1966]

Bump

 

[Cranky]

Used on the street or track? How many miles or passes are on them and what kind of lift were they working?

 

[RustyRatRod]

If Cranky doesn't get them, I would be interested in the first set if they will work for 383 with a flat solid cam.

 

[Cranky]

If Cranky doesn't get them, I would be interested in the first set if they will work for 383 with a flat solid cam.

Don't ya need something closer to around 8.5" for a low deck?

 

[RustyRatRod]

Don't ya need something closer to around 8.5" for a low deck?

I'm not real sure.....that's sorta why I asked. This is the first big motor I've ever built from scratch.

 

[rrowdy]

Rusty,

I'm doing a low deck stroker and the pushrod length came out to 8.250 OAL used with Crane adjustable rockers.

Hope this helps some.

Good luck!