Bearings and rings needed

[SGBARRACUDA]

Long shot but before I have to go to the parts store I figured I would throw it out here. I need .020 Main bearings. Prefer the large thrust size flange but I'll take the early ones also. And a set of .040 over piston rings. This is four a 77 440.

 

[moparpoor]

I believe I have a set of .020 under bearings.I will check and get back to you!

- - - Updated - - -

no just rod bearings sorry

 

[mobileparts]

I deal with several engine parts suppliers -- oversize rings and bearings should be no trouble, at all, to obtain... am in the library using computer -- can't check while in here....
Call me -- I'll get you unquestioned availabilty and price......
Craig 516 - 485 - 1935 ..... New york....

 

[Hemirunner]

Long shot but before I have to go to the parts store I figured I would throw it out here. I need .020 Main bearings. Prefer the large thrust size flange but I'll take the early ones also. And a set of .040 over piston rings. This is four a 77 440.

4.360" rings in what width? 043, 043, 3mm or 1/16, 1/16,3/16 or those HP robbing stock style 5/64" rings?

 

[SGBARRACUDA]

Just need stock rings for cast pistons.