flywheel

[GITEX]

I need a 10.5 " flywheel for my engine test stand , anybody have a good used never to be put in a car again piece??? Big Block 8bolt .
Thanks Rich

 

[Cranky]

Whoa....8 bolt. Didn't know a 10.5 8 bolt was/is made.

 

[Photon440]

Whoa....8 bolt. Didn't know a 10.5 8 bolt was/is made.

On the "Best looking 60's070's muscle car" topic, post #103 shows a spec sheet for a '68 Hemi Dart, with 10.5 clutch. Brewers sells them:
http://www.brewersperformance.com/proddetail.asp?prod=FW258

But I always thought they were 11" myself.

 

[GITEX]

I have a 10.5 bell housing i'm using, I'm assuming i will need a 10.5 fly wheel? Maybe i should get a 11" bell housing and fly wheel.

 

[Cranky]

Had a 11" aluminum wheel not too long ago....had a couple of local shops call me wanting to borrow it for dyno tests. Told them I was interested in selling and not loaning. Been down that road before and played hell getting my parts back. Finally sold it. Seems the 8 bolt wheels are not very easy to dig up when you need one and are hard to sell when you don't need it lol

 

[moparmarks]

70-1 Hemi used the 10.5 wheel with the aluminum bell. Several of 130T 8-bolt wheels out there.

 

[GITEX]

So here's what i do have 2892626 bellhousing shows it's a 11" (A833 69 b body). What i need is an 8 bolt 11" flywheel if anybody has 1 for sale, 130 tooth will be fine. The reason is my callies crank has 8 bolt holes. Again this is going to be used for testing my engine only.