WTB '73-74 Road Runner/Satellite rear wheel opening moldings & rear bumper inserts

[vegiguy]

I need the moldings that go around the edge of the wheel openings on the left and right quarter panels, and also the rubber/plastic inserts that fill the space between the back panel and the rear bumper.

Thanks for any response or leads on finding these parts.

 

[QuickBpBp]

http://www.ebay.com/itm/1973-1974-P...ash=item5d6d2d7288:g:V9QAAOSwBahU80LX&vxp=mtr

http://www.ebay.com/itm/73-74-Road-...ash=item237efd5663:g:vKsAAOSwibJTx-fJ&vxp=mtr

Rear bumper fillers are available in reproduction. Expensive but very hard to find that are not cracked warped or missing studs.

http://www.ebay.com/itm/NOS-73-74-M...ash=item1ec3005abf:g:xPUAAOSwol5YwTjO&vxp=mtr

Wheel moldings hard to find also and Nos set just sold for $771 plus shipping..

 

[vegiguy]

http://www.ebay.com/itm/1973-1974-P...ash=item5d6d2d7288:g:V9QAAOSwBahU80LX&vxp=mtr

http://www.ebay.com/itm/73-74-Road-...ash=item237efd5663:g:vKsAAOSwibJTx-fJ&vxp=mtr

Rear bumper fillers are available in reproduction. Expensive but very hard to find that are not cracked warped or missing studs.

http://www.ebay.com/itm/NOS-73-74-M...ash=item1ec3005abf:g:xPUAAOSwol5YwTjO&vxp=mtr

Wheel moldings hard to find also and Nos set just sold for $771 plus shipping..

I already knew all that; I just thought it wouldn't hurt to place an ad on here in the remote chance someone might have a good set of these from a car that was wrecked in the front.

 

[QuickBpBp]

I already knew all that; I just thought it wouldn't hurt to place an ad on here in the remote chance someone might have a good set of these from a car that was wrecked in the front.

Ok Good luck then. Sorry for trying to help you out.

 

[72 BLUE 400]

i have a few wheel lip moldings and a couple pretty nice rear bumper filler corner pieces.

 

[vegiguy]

i have a few wheel lip moldings and a couple pretty nice rear bumper filler corner pieces.

I'm sending you a PM

 

[72 BLUE 400]

heres what i have 2 of the 3 wheel lip moldings are pretty nice just need polished and a couple dings straighted,the bumper fillers 1 is extra nice the other is missing a small piece that is not shown when installed

 

[72 BLUE 400]

yeah quickbpbp,i made the same mistake this guy is an idiot wants something for nothing waste of a wanted post.offered me $75.00 for everything pictured,then calls me a jerk for trying to help him.

 

[OH71RRunner]

There's a set on Craigslist posted Louisville ky for $50.

https://louisville.craigslist.org/pts/6038422496.html

Not mine. Just found them when I was searching stuff.