I could stare all day

[Pops1967GTX]

The proper way to clean a Vinyl 45...

 

[drobertson]

I didn't know what to expect opening this thread...

 

[63SPF]

The proper way to clean a Vinyl 45...

Woman + fingers + hole = of course

 

[kiwigtx]

The proper way to clean a Vinyl 45...

I thought she was rewinding it before returning to the Record Store.

 

[Brandy]

I thought she was rewinding it before returning to the Record Store.

 

[Pops1967GTX]

Photo "inside an intake'..

 

[Pops1967GTX]

 

[GetX'd]

The proper way to clean a Vinyl 45...
View attachment 426783

I've got something that would clean up really nice in the same fashion .....

 

[Pops1967GTX]

https://www.tumblr.com/video/swarfs/161182790344/700/

 

[Riverdawg]

https://www.tumblr.com/video/swarfs/161182790344/700/

That's hot.....

 

[Bb70charger500]

 

[Pops1967GTX]

 

[khryslerkid]

A little lengthy but I stared for the whole clip. This guy has the strongest fingers!

 

[Pops1967GTX]

​

Most of the tools we use to bore holes in metal are sharp — they carve unwanted material out. There are times you don’t want to waste that material or can’t have metal shavings and sparks all over the place. That’s when friction comes into play. This GIF shows a friction drill going through metal like a hot knife through butter. Well, it’s actually going through like a hot drill, but that’s beside the point. A friction drill is usually made of a hard ceramic with a melting temperature higher than the metal it’s used on. By spinning incredibly fast, it generates enough heat through friction to push right through the metal.

 

[69 GTX]

I have turned a endmill into a friction drill a time or two.

 

[Pops1967GTX]

1000 lbs (453 kg) hot wound spring for sub-sea oil and gas industry

 

[Bb70charger500]

That's pretty cool, but can someone explain the explosion to me that was inside the gel block after the bullet passed through?

Man not sure all I can think of is extra powder that finely lit !

 

[Cranky]

View attachment 429714

Do this on a manual machine!!

 

[Cranky]

I have turned a endmill into a friction drill a time or two.

LOL!! So have I and usually it wasn't on purpose....and you know you're having a bad day when you fry a 2" dia drill bit

 

[khryslerkid]

Do this on a manual machine!!

Thats mesmerizing !