• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOUND Looking for Deck Lid Molding for 1963-64 Fury

Status
Not open for further replies.

moparfreak92

Well-Known Member
Local time
4:54 AM
Joined
May 3, 2014
Messages
62
Reaction score
100
Location
Kiel
Feedback: 0 / 0 / 0
Hi, i´m looking for the deck lid molding for 1963-64 Fury...

Classic Industires is very Expensive!
 
that is to expected it's a MOPAR
 
Have some spare trim parts for my '63 Fury what molding is it you're looking for? Also there are others on the forum who likely have stuff they might part with. One source is Joe Suchy who I've bought some items from before
 
I'm looking for this molding

mn2170_v2.jpg
 
moparfreak92 I just picked up a 63 Belvedere 4 door and I do have the molding you are looking for, it is very straight just needs cleaning up. bad thing is some one drilled a little hole on each end if yo would like some pictures you can email me on my ****Use Private Conversation for contact - for some reason for the last week I cant down load any pictures on here
 
Last edited by a moderator:
ron h , not stealing this thread , but do you have the drivers side fender and door moldings for 2 dr ht 63 fury ?

13090027.jpg
 
ron h , not stealing this thread , but do you have the drivers side fender and door moldings for 2 dr ht 63 fury ?

View attachment 550163
Sorry looks like I don't but will get into the attic to see if there's any pieces I put up there I'm forgetting about; but doubt it. I have the top strip (the top piece for the dual side trimming for the left door) among hodge podge of trim parts I have.
 
well see what you got , i'm not going to rush you . i have two 63 furies , one 2dr ht sport golden commando car , and you saw the 2dr ht fury . i believe the lower trim piece is missing on my fury . i'll check tonight .
13090023.jpg
Fury.png
 
Yes, i do ;)
I have one that is in pretty good shape. Someone drilled a little hole in each end for a rivet. If you want I can send you some pictures later today. If you can send me your regular email for some reason its not letting me load pictures on here. I could let you have it for $35.00 plus shipping

Thanks
John
 
Status
Not open for further replies.
Auto Transport Service
Back
Top