Free parts

[pwDave]

Friend of mine gave me some left over race car parts from a a-body, all the steering parts, ball joints,tie rod ends drag link, steering box, the door glass parts handles and two boxs of misc. other stuff. included is a set of rear springs that he said were super stock springs, 20.5 inches from pin to eye, I wrote down the numbers that was on them and now I need to line those up with the part no.s in a parts book to see what I have, if I can use them on my 64 bel I will but if they are out of my weight range I can give all this stuff to my son who has a 70 dart to have as spare parts. if anyone can help with the no.s here they are, P3412003, P3412002, there is one no. common to both, 80556, and a four digit no. stamped across the spring, 2355 and 2925, I was told that all this stuff is almost new, and it looks it, was taken off for an upgrade, Dave.

 

[Daves69]

3200 lb springs
I'm interested in them if you can't use.

 

[pwDave]

Thanks Dave, I can use them without changing any thing on the car, I have cal-tracs so there may not be a need. I do some research and get back to you

 

[oldbee]

3200 lb springs
I'm interested in them if you can't use.

D--- it , I'm thinking about a set of 3400# to replace the ones I have. Oh well..

 

[Daves69]

.......I do some research and get back to you

BTW, they will be biased so one side should sit a touch higher static.

 

[pwDave]

Yea, one is a little heavier than the other, the springs are the only pieces that will fit my car. as soon as I check with Kasey, I will know something. Dave.