• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Big block ported heads

Status
Not open for further replies.

mopar mafia

Well-Known Member
Local time
7:37 AM
Joined
Jun 17, 2010
Messages
415
Reaction score
54
Location
ky
Feedback: 1 / 0 / 0
Contact seller
i have a set of 516 closed chamber heads we had built and they have less than 50 miles on them. We got a good deal on a set of indy heads so we are selling these. They have comp springs for up to .550 solid lift cam, bronze guides. Competition 3 angle valve job. 2.14 1.81 valves and fully ported. Milled .010 just to clean them up. Cost over 1200 to do all the work and i will take 700.00. Bolt these on and go.Pick up in leitchfield Ky 42754

0946FDC0-1FBA-4430-B14D-54B28AE338DA.jpeg E35902CE-37E6-4E2F-8F33-B21908F95DAB.jpeg E9228815-112F-4CBD-8975-685F4E5EB428.jpeg 178408AC-2677-4818-A83F-4D1CDC06D956.jpeg
 
What is all the orange stuff on the int/ ex faces? Is that sealant?
 
i have a set of 516 closed chamber heads we had built and they have less than 50 miles on them. We got a good deal on a set of indy heads so we are selling these. They have comp springs for up to .550 solid lift cam, bronze guides. Competition 3 angle valve job. 2.14 1.81 valves and fully ported. Milled .010 just to clean them up. Cost over 1200 to do all the work and i will take 700.00. Bolt these on and go.Pick up in leitchfield Ky 42754

View attachment 693491 View attachment 693493 View attachment 693496 View attachment 693498

Flow figures ????/
 
I cant find the sheet but i do know peak flow was 276@ .600
 
My 440 with these heads ran a little bit better than my buddys 440 with ootb edelbrocks that just had a vj and springs changed. Both same weight and similar setups so i know they work good
 
Status
Not open for further replies.
Auto Transport Service
Back
Top