70 charger Question

[Ludstick]

Does anyone have a clue how to install the after market rear upper door pads ? the originals have 5 holes on the lower area of the pad, the aftermarket has nothing.
Thanks, any information is appreciated!
Jeff

 

[dual fours]

Hello there Ludstick/Jeff and welcome to the FBBO site. Sorry though I do not have the answer for you. Someone here will.

 

[Islandkent]

Welcome Jeff.
Were they meant to be drilled where needed? Any chance of showing us a picture of the new panel? Five holes along the bottom edge hidden out of site. Right? I'm going to g check my original panels out just for curiosity.
Once more Jeff Welcome aboard. And like D4s said some one will have a correct answer for you here shortly.

 

[Demonic]

Usually for repo stuff like that you get to make the holes yourself. Pics? Source for the rear upper pads?

 

[finoke]

Does anyone have a clue how to install the after market rear upper door pads ? the originals have 5 holes on the lower area of the pad, the aftermarket has nothing.
Thanks, any information is appreciated!
Jeff

My original 1970 charger rears were held on by clips with only one screw in the very end near the rear seat back. My repos were the same but I had to drill the dimple in the rear for the one screw.

 

[fine69]

Speaking of which, do you need to take the seat back out to remove/install those upper pads?