New here

[Big wit]

Hello all i have a 69 gtx i am installing a gearbender overdrive unit on and i am thinking about the holly efi setup i am experiencing a problem i am about to track down my lights inside the car pulsate and flicker all the time any suggestions and what are some thoughts on brake upgrades i have to really stand on my brakes to come to a sudden stop

 

[Builderguy]

Welcome aboard Sir, from the middle of the mitten. As for you lights flickering could use more information. Are you using the original alternator or have you replaced it? Is the other wiring (bulkhead connector, etc) original or has it been replaced. Any high draw extras added on to the load? Are you running thru the ammeter or has that been bypassed or modified?

 

[68sprtsat383]

Welcome

 

[Fran Blacker]

Welcome from Ct. I unplugged bulkhead connector and when plugging it back in the female connector got pushed out. Had to get under dash to reconnect it to get my headlights working.

 

[oldbee]

Welcome aboard from Ohio.

 

[Jerry Hall]

Welcome from Alabama.
Dash lights only or is dome light and other courtesy lights too?

 

[MoparLeo]

aboard. Might want to post the questions on the proper forum. Might attract more response.
And of course, we need pictures .

 

[MoparMitch]

Welcome to the Madness !!!!

 

[polywideblock]

g'day from Australia

 

[GetX'd]

Welcome to FBBO from SoCal

 

[66383]

fromKy.

 

[Hey-O]

Welcome from Missouri!!! Gear vendor overdrives are fun!!

 

[Budnicks]

we need to see that 69 GTX

welcome to FBBO from NorCal Sierras

 

[mr. b]

welcome to FBBO now lets see that GTX

 

[Imperial One]

Welcome from Canada.

 

[Big wit]

Welcome aboard Sir, from the middle of the mitten. As for you lights flickering could use more information. Are you using the original alternator or have you replaced it? Is the other wiring (bulkhead connector, etc) original or has it been replaced. Any high draw extras added on to the load? Are you running thru the ammeter or has that been bypassed or modified?

I am using a direct oem quality alternator and it is running through a remanned ammeter the wiring harness and bulk head has also been replaced with a prefabbed harness i done a complete resto the car is drivable and runs well just trying to improve on a few things i know these cars had major wiring issues