Trim ID needed.

[Rat Rod Al]

This trim was marked 67 Coronet. Inside rear window. Does it look correct? And would it also work on 67 Satellite/GTX. ?

And this piece also.

 

[Rat Rod Al]

I may as well add these in !

And the one marked 66 charger , look correct? What else would it fit? Thanks for the help !

 

[1 Wild R/T]

The middle to brackets look like rear exhaust hangers for a 73-74 E body..

 

[Rat Rod Al]

The middle to brackets look like rear exhaust hangers for a 73-74 E body..

I got these parts from a resto guy some where marked. Some right and some wrong and some not at all.

 

[1 Wild R/T]

Thing on those exhaust brackets, most folks won't recognize them, most are familiar with the 70- to early 73 style brackets... Chrysler changed the design in mid-73 because the original design hung the exhaust off the trunk floor pan & the trunks were rusting allowing the exhaust to hang down... In 73 the new brackets hung the exhaust from the frame rails...

 

[Rat Rod Al]

Thing on those exhaust brackets, most folks won't recognize them, most are familiar with the 70- to early 73 style brackets... Chrysler changed the design in mid-73 because the original design hung the exhaust off the trunk floor pan & the trunks were rusting allowing the exhaust to hang down... In 73 the new brackets hung the exhaust from the frame rails...

Like for the hangers in this pic?

 

[1 Wild R/T]

Like for the hangers in this pic?

View attachment 1037457

Yup, those are the early design...

If I were home right now I would post pictures of the design you have, I have a pair too, from a car I parted out in the 90's... But they are uncommon enough that when I searched for a photo to post I had no luck...

 

[Rat Rod Al]

Yup, those are the early design...

If I were home right now I would post pictures of the design you have, I have a pair too, from a car I parted out in the 90's... But they are uncommon enough that when I searched for a photo to post I had no luck...

Thanks Sam !

 

[1 Wild R/T]

Thanks Sam !

Who's Sam? I'm Randy..... BTW it was more fun telling that to the girls in Australia than to you....

 

[Jerry Hall]

This trim was marked 67 Coronet. Inside rear window. Does it look correct? And would it also work on 67 Satellite/GTX. ?
View attachment 1037421
And this piece also.
View attachment 1037422

Picture 1, 66-67 B bodies

 

[440 4 speed]

If the steering column cover is metal, it would most likely be for any 66 b body. They are narrower than 67 b bodies. Most 67 covers I have seen are plastic.
If a am wrong, I hope someone will correct me.

 

[Rat Rod Al]

If the steering column cover is metal, it would most likely be for any 66 b body. They are narrower than 67 b bodies. Most 67 covers I have seen are plastic.
If a am wrong, I hope someone will correct me.

Yes , this piece is steel.