FOR SALE 1969 Virgin 440 engine/Transmission Totally complete

[GTX JOHN]

1969 Intact 440 Engine
Never Rebuilt or touched
Steel crank
Complete from Carb to Pan
All date coated Jan 1969
750 AVS
Distributor
Water Pump
Starter
Fuel Pump
B Body HP exhaust manifolds
78,000 Miles
Taken out 1972
Suggest Rebuilding as sitting in Shop nearly 50 years
But It is all there
Matching trans included and untouched/complete
so
$1,950
OR
$1,750. Less Exhaust manifolds

Will deliver 300 Miles for Gas Money
I can also pallet and arrange Shipping (On your Dime)
My son will post pictures after Dinner tonight
I am old and do not know how.

West Coast = Near Las Vegas 89005

 

[Jesse6869]

Pictures ?

 

[davek]

serial number to see what it was in.

 

[mpd659]

Interested in the manifolds. I sent you a pm

 

[GTX JOHN]

I will not sell manifolds separately until engine sells first without them
I do have a set of 440 HP manifolds for sale on this site last week but
they are same # but early 1970 Julian date.
The Vin near pan seems to have only the last eight numbers of the Vin.

Is it supposed to have the first four as well that tells what it was in?

Only 8 characters on the Vin pad = I looked
again to be sure!

 

[GTX JOHN]

Pictures ?

My son will post them after Dinner = I will call him right now!

 

[dadsbee]

The Vin near pan seems to have only the last six numbers of the Vin.
Is it supposed to have the first four as well that tells what it was in?

Many '69's only have 9AXXXXXX or 9G.. or 9C.. or 9_ so you'll only get a hint of what car line.

 

[GTX JOHN]

Many '69's only have 9AXXXXXX or 9G.. or 9C.. or 9_ so you'll only get a hint of what car line.

Thanks = thought I was losing my Mind!

 

[Big D A12]

Please post a picture of the VIN, block cast date, and stamp pad with the engine assembly date. This will help us know what we are looking at. Many people are looking for specific dates. Thank you.

D

 

[GTX JOHN]

Please post a picture of the VIN, block cast date, and stamp pad with the engine assembly date. This will help us know what we are looking at. Many people are looking for specific dates. Thank you.
9
D

Block Casting Date 1/15/69
Intake Casting Date 1/22/69 (178 #)
I will look for the rest next week
I took intake off and everything looked
good: rockers/pushrods/cam/lifters etc.
No apparent rust or damage!
Oil was dirty but did not look contaminated.
Some sludge=almost 80,000 miles engine
Valley pan and what I could see of head gaskets
Looked OEM mopar and never apart!

 

[69 GTX]

Does it turn over or is it stuck?

 

[GTX JOHN]

I will

Interested in the manifolds. I sent you a pm

I have an ad on here for 68 to 70 HP manifolds on this site a couple weeks ago = they are available and I am somewhat negotiable on them.

If I get a chance = I will remove the spark plugs and put oil in the
cylinders and work on turning it over this week.

Again, This engines has quite a few miles on it and has been sitting for
over 40 years. It should be considered a core and recommend rebuilding
and not just putting in your car and turning the key.

I have several extra 440 steel cranks and rods =
If anything does not mag good in this engine I will replace
any of them at no charge except shipping = But I
expect the one in the engine to be fine!