FOR SALE Parting Out 63 Plymouth Belvedere 4 Door.

[hemi john]

I have a complete 63 Plymouth 4 door belvedere that I am parting. If you need anything let me know.

Thanks , Hemi John

 

[Casey]

I have a complete 63 Plymouth 4 door belvedere that I am parting. If you need anything let me know.

Thanks , Hemi John

Hi John, any chance that has a 6cyl radiator in it? Thanks Casey

 

[Olwhite63]

Driver front fender? Needs to be DRY, please?

 

[Casey]

Driver front fender? Needs to be DRY, please?

I’m sorry. I don’t understand your response.

 

[Olwhite63]

Looking for a straight, not rusty, driver-side fender for a 63 Plymouth

 

[hemi john]

Hi John, any chance that has a 6cyl radiator in it? Thanks Casey

Casey sorry was busy this week. Yes it does, not sure if it is good or not the car has not ran in over 20 years

 

[hemi john]

Driver front fender? Needs to be DRY, please?

I am pretty sure it has a little rust at the bottom like every single one does. I will check if you would like

 

[hemi john]

Hi John, any chance that has a 6cyl radiator in it? Thanks Casey

Casey here is some pictures of the radiator. Like I said it has been sitting for a long time

 

[hemi john]

Driver front fender? Needs to be DRY, please?

Here is some pictures of the fender I have it is pretty straight just a couple pin holes in it

 

[zigs]

Do you know if the 63 plymouth and 64 Polara center link would be the same?

 

[hemi john]

Do you know if the 63 plymouth and 64 Polara center link would be the same?

Zigs I am really not sure on that.

 

[zigs]

Zigs I am really not sure on that.

From what I was just told 62 to70 B Body should work

 

[zigs]

From what I was just told 62 to70 B Body should work

So do you still have center link?

 

[Arctic Mopar]

I'm in need of turn/parking light trims and lens. The ones in your picture look better than mine. Are they still avalable? Thanks

/

 

[hemi john]

I'm in need of turn/parking light trims and lens. The ones in your picture look better than mine. Are they still avalable? Thanks

/

They are, what side do you need and I will get some better pictures for you

 

[Arctic Mopar]

I'm looking for both sides

 

[Arctic Mopar]

also looking for a rear bumper,is yours available? I have a Fury, think the bumper is the same as
a Belvedere. Thanks

 

[hemi john]

also looking for a rear bumper,is yours available? I have a Fury, think the bumper is the same as
a Belvedere. Thanks

I will get you pictures of everything tomorrow. I got busy busy today and will be out there tomorrow

 

[Scott Kiger]

Looking for dash prices like a
Glove box door, ashtray, and instrument cluster, etc. Building a drag car that still has the dash frame in it and would like to make it look factory

 

[Blackheart]

Do you have the hood latch rod that like in this picture