69 GTX trunk lid “Plymouth” nameplate location

[A4GTX]

Does anybody have measurements for the placement of holes on the decklid for the “Plymouth” logo on 1969 GTX?

 

[topside]

Richard (Rick) Ehrenberg will probably have the factory-spec diagram for that.
He's a member at Moparts.com and also sells on Ebay, if you can't get that info or contact him at the Mopar Action website.

 

[A4GTX]

Richard (Rick) Ehrenberg will probably have the factory-spec diagram for that.
He's a member at Moparts.com and also sells on Ebay, if you can't get that info or contact him at the Mopar Action website.

Thanks!

 

[Rich H.]

Thanks!

I like your username and because you may never hear back from E-Boog I took a few minutes to make those pics. Centerline of the holes is 3/4” above the character line and the length dimensions are measured from the edge.

Second shot is some A4 I recently shot for my ‘69 GTX. Now I have to make the rest of the car look the same.

Hope this helps.
Rich

 

[A4GTX]

I like your username and because you may never hear back from E-Boog I took a few minutes to make those pics. Centerline of the holes is 3/4” above the character line and the length dimensions are measured from the edge.

Second shot is some A4 I recently shot for my ‘69 GTX. Now I have to make the rest of the car look the same.

Hope this helps.
Rich

View attachment 1416531

View attachment 1416532

Excellent! Thank you so much! So many people say “why does your green car have a blue interior”. Lol