- Local time
- 9:26 AM
- Joined
- Feb 29, 2020
- Messages
- 2,959
- Reaction score
- 5,468
- Location
- Heart of Dixie.....
Okay guys, borrowed this from my neighbor to try my luck at making some dents a bit less. I tried on a motorcycle gas tank as well as a late model car, a 2004 with fairly thin sheet metal. With both, the glue would pull loose bout a soon enough pressure was applied to get the metal flexing out, and break loose. Learned if you waited a bit before pulling the glue off the pulling stoppers, it would take a massive effort to get it off. Could the glue I used be incorrect, too old ? I would think they work better than this one. thanks