Speedo gear for 1964-65 chart

[Ceedawg]

Is there a chart for gear ratio teeth on the 64 trans, I have an 18 tooth, not sure what is was for, rear long gone so can’t check ratio. /6 3 speed manual trans.
Thanks
Can these still be bought?

 

[chignikred]

i have a printed buried, i also have a selection of gears. 20 ans 21 teeth are the hardest to find.

 

[ruffcut]

I believe A and A Transmissions sells them

 

[Ceedawg]

How do they adjust from one size to another? The later is by turning the holder.

 

[khryslerkid]

Is there a chart for gear ratio teeth on the 64 trans, I have an 18 tooth, not sure what is was for, rear long gone so can’t check ratio. /6 3 speed manual trans.
Thanks
Can these still be bought?

View attachment 1822161

Once you figure out what gear you need start a WTB add on here. More than likely a member will have one.

 

[khryslerkid]

How do they adjust from one size to another? The later is by turning the holder.

Good question. It might be the total height of the gear itself. All I know is you just install them and they work.

Some of the higher rear gear ratios do require an adapter.

 

[Ceedawg]

Great, looks like I’ll need the adapter and 19-20-21 to start.big question, where does that adapter go? My cable is a solid rig right into trans unlike the later that screws on.

 

[icetech]

What? I didn't think they were changable due to not being able to adjust the distance from the tailshaft gear? I need a 17 tooth then... my speedo is like 80 at 40 right now..

 

[icetech]

Brewer has em.. not cheap but i'm glad someone is making them... i was feeling bad for my poor speedo

1962-65 A833 727 SPEEDOMETER PINION GEAR 17 TOOTH/ORANGE-NEW - Mopar A833 4-Speed Transmission & Component Specialists

1962-65 A833 727 SPEEDOMETER PINION GEAR 17 TOOTH/ORANGE-NEW

www.brewersperformance.com

 

[chignikred]

the different teeth gear clips on the cable adapter.