Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I actually spoke with this scammer on the phone. Very convincing. I dragged it out, got his bank info and turned everything over to IC3. Hopefully he gets prosecuted.
Just wanted to pass this on- craigslist scammers are everywhere! Ran into this ad for a Hemi engine on Craigslist, London, UK. They are pirated photos from an EBay sale 3 years ago and are a complete scam. I verified this with the EBay seller who still has the engine. A second hemi engine on the...
Thank you all for the advice! I had no idea how rare these pieces are so I will be extra careful in removal and installation. I will also be watching for spares.
since 3 light tail panels on the Coronet are not reproduced, can anyone advise on how to restore an original tail panel? Were they chromed originally or just polished aluminum? Any recommendations for someone that can restore these panels?
It won't make a second click. One click even if I shut the door hard. Then it is a half inch gap from closed.
Any idea if there are repops out there or can it be rebuilt?
Does anyone know if the door lock mechanism is being reproduced or is there a rebuild service? The door will not stay closed tightly on my Road Runner and it appears the spocket wheel is sloppy/worn out. Suggestions appreciated.
Ok guys. Here's the follow up. Might have this figured out. I have the NSS screwed in as tight as I can. Wiring is right. If I put the trans in reverse no lights. If I use a thin pick to depress the plastic on the switch a little bit more, lights come on. If I leave the pick wedged and slide...
Good advice! Last night I fixed bad splices for the plug by soldering the wires. Thought that perhaps the problem was solved but it still only starts in neutral. I'm going to loo closer at the switch today. The rooster tail is in place and appears to be moving the switch properly. Whether it's...