Recent content by 66 Charger

What color is the tach wire? In the engine bay.

which oil pick-up do you have?

I have a 440 and I'm going to use a 971 pan but need to know which is the correct oil pick-up that I can use. If it matters I also have a windage tray. Thank you in advance...

Well I found out why nobody has the Cragar rims I'm looking for. I called Cragar and they said production was shut down for parts of the summer because they moved their production from the west coast to the east coast and they are getting their productions going again. Will not see the rims...

I have been looking around for a set of pro street 390's and nobody has them. Although both Jegs and Summit have estimated ship dates they both say the do not know when a new shipment will arrive. Jegs rep told me they may have been discontinued. Summit says they are not discontinued.

Can the bushings be purchased new?

I was told the pro street comes in the below now. will a -32 off set work? 390 Series Street Pro Wheel Size: 15'' x 10'' Bolt Pattern: 5 x 4-1/2'' & 4-3/4'' Rear Spacing: 4-1/4'' Offset: -32mm

When I purchased my 66 Charger it came with a stock running 440 block stamped (2536430.3 1966-72) in it. Also I was given another 440 that the guy said it was a "race engine" (3698830.440.9 1973-75) I knew nothing about it and never heard it run. He did have a receipt from a speed shop in Long...

Have you tried here? http://66-67charger.com/forum/index.php

Going into my 66 4spd This will be going into my 66 4 spd soon after it comes back from being painted...Disregard the broken spark plugs. :-) CANT WAIT!!!! Lou

I haven't gone thru it yet to see if its ok but after a rebuild I was going to see if I could use it in my 66 charger... Thanks, Lou

Full view 833 Here is a full view of the 833... Thank you for your help... Lou

I recently came across a 833 4 spd and I am trying to identify what and where it might have come from... I also am not sure of what type of shifter this is. If you have any input it is appreciated..There is just a patten # (3216274 3306126) on the face plate no name....There is also the #...

Check the obvious first...Are the plug wires fully on and or melted anywhere?

Welcome Joe......Where in CT are you from? I am in Southington.....