Recent content by 68gtx

this style won't work with my clutch

t this one is too big , not enough clearance with shroud i have , thanks though

pm sent

i am in need of a 7 blade clutch style fan, has to be 18"-19" i don't need the clutch , just the blades but will take whatever as long as they are straight

anyone know the diff in shaft length so i can make sure?

this is what i have

bought a new open box msd dist at a swap meet , going to install it and thought id do some research, box says its a 440 dist msd 8387, but if i go to msd website it looks more like the 383-400 list pictured 8386 by the way the cap has external screws. even if it is a 8386 will it work in the...

parts store here are pretty much order basis

I'm using this in my 84 truck, installing a 440 with the passengers side outlet to be able to use my current rad..

what car did a 440 come in that had a passengers side lower water pump outlet ,have a housing but having a hard time finding a hose without an application

Ok got it figured , next question , the pickup tube itself , how tight ?? It starts to tighten about three threads down , 1/4 way left to go , Shoikd I go one more full turn or leave it at just getting tight ? How easy is the t to crack the block where the tube goes in ?

but all that would have to be done after the bracket

finishing my 512, milodon 8 quart pan, pickup and windage tray, pickup tube is approx 3/4 of an inch off of bottom of pan, i am thinking it should be closer but how the heck do you accomplish that? tube is dead solid!!! and with the way it mounts to support bracket that goes onto main cap , it...

what seals the edge of the pan to the heads when you cut the runners off?

pm sent