• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by 68RR440hp

  1. 68RR440hp

    Reply to update 'Project Headlights.' by '68RR440hp' on item 'Race car to Pro street'

    Hello , my car is tubbed but the rearend is stock length. the wheels are offset to the outside 31x16 x 15. I tubbed my mustang and i installed the rear clip then cut out the wheel wells ,then i put the wheels and tires i wanted under the car and measured the distance then had the rearend narrowed.
  2. Race car to Pro street

    Race car to Pro street - Air filter wrap

    Green wrap
  3. Race car to Pro street

    Race car to Pro street - Alternator

    Got the alternator installed.
  4. 68RR440hp

    Reply to update 'Project Headlights.' by '68RR440hp' on item 'Race car to Pro street'

    Hello , and thanks for checking out my car.. while it is driven on the street it is a Prostreet car. I have 2 cars with 5k stalls and big cams running on 112 octane gas. both cars are on the trailer more than on the street.. have the 5k stall in my mustang since 1998 and never had any problems.
  5. Race car to Pro street

    Race car to Pro street - Project Headlights.

    Got the headlights installed.Also going to make a custom lexan hood scoop.
  6. 68RR440hp

    Comment by '68RR440hp' in item 'Race car to Pro street'

    That's a cool story.
  7. 68RR440hp

    Reply to update 'Dyno tuning' by '68RR440hp' on item 'Race car to Pro street'

    The rear tires are 31x16-15 and yes the car is tubbed.
  8. Race car to Pro street

    Race car to Pro street - Headlight panels.

    Got a pair of headlight panels.
  9. Race car to Pro street

    Race car to Pro street - Dyno tuning

    Dropped the car off at the tuners for some holley carb work and runs on the dyno.
  10. Race car to Pro street

    Race car to Pro street - Trunk

    10 Gallon fuel cell with # 10 an return line. Welded the oil fill cap on the valve cover.
  11. Race car to Pro street

    Race car to Pro street - Race car has 2 batterys and no alternator.

    Project race alternator install. Got the alternator and just ordered the crankshaft pulley and spacer for custom install.
  12. Race car to Pro street

    Race car to Pro street - Windshield wipers installed.

    Got the wiper linkage installed and the wipers.
  13. 68RR440hp

    WTB Headlight bucket mounting bracket

    Looking for driver and passenger side headlight bucket mounting brackets.
Back
Top