• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by 69sixpackbee

  1. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    To all who have inquired about this kit lately, I'm truly sorry but I am not going to be able to make them at this time. Because of unforeseen circumstances that have arisen quite suddenly, I am forced to put my attention elsewhere and I just cannot get to these as previously promised. I hope...
  2. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    PM sent!
  3. 6

    Sequential Turn Signals Added To The 'Bee!

    Hiya folks, Just thought I'd share my latest quickie project. I have wanted to put sequentials on my '69 1/2 A-12 so I made a quick vid on You Tube: http://youtu.be/MhSUbuW5yXY I always loved how my Grandpa's '69 Imperial LeBaron looked with them and even the "blue oval's" of the era. I was...
  4. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Check it again.I have not seen it. I sent you a PM, Brian. Thanx, Bud
  5. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    PM sent!
  6. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Hello, Brian! I have a set ready to go. The price is still the same...I do not do the "10% markup every year" that others do. I'm in it for the hobby...:) I will send the 4-screw set up to my northern neighbours for the same $60.00 for all four screws and $45.00 for the two screws and the...
  7. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Thanx to all for helping keep the hobby alive and well! BTW, Meep-Meep, You can come over....... and I'll put your butt to work on that lathe! :icon_wink::icon_wink:
  8. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Thanx! :headbang:
  9. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Sent out today! Thanx again. Bud
  10. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Thanx for the positive feedback! Now go out and enjoy it!! :)
  11. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    A BIG thank you goes out to all of you whom have shown interest in my carb screw tool! Thanx again for your business, Bud Weaver
  12. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Well, I have them finished. I used blue 1/4" OD Turcite for the handles. The overall length of the tool is 9 3/8" and is small enough to reach through the linkages and long enough to grab easily. I have decided to use the non-compliant, straight shank because it is a bit less "fidgety" to...
  13. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    Guys, I am making upmore of these. I am tooling the handle in my CNC and I will have the prototype soon so I can send the image so all can see. The handles are going to be yellow Acetal and will be inset engraved in one area which will help indexing (think "Craftsman" lettering in the handle)...
  14. 6

    My Solution For Accessing Those Pesky Rear Carb Sc

    I was just goofing around yesterday in the shop and I decided to make an easier and cheaper solution to the hard-to-reach rear carb idle screws on the Six Pack setups. Those of you who know what I am talking about can appreciate this! I am too cheap to buy the high-dollar "Competitors"...
  15. 6

    Driveshaft Questions

    Hey, guys, I am wondering what driveshaft you are running in your Bee's. I just go my OEM back from Inland Empire and before I put it back in I might just upgrade to something better. My milll is putting about 550 ponies to the flywheel and it was a bit much for the stock 3.25" one so I just had...
See more
Back
Top