Recent content by 70_FJ6_RR

Nice combo!

TRT30 code gives you 30% off any order, but only $50. max savings. So, if you order one head at a time you save $100.! #60929 is reg $779. ($1558.) discounted to $729. with code, that's $1458. pair, without tax.

How are the door jam sill plates? I'm looking for a driver side rear. Has to be nice. Need a price on DS rear one, and a price for all 4 with screws. Pm me please. Thanks!

The primer color differences will affect final color, especially if you don't put enough color coat on. I would also intermix the two GY4s you have into one can, or back and forth in each can. I like to use white under light colors, if originality is not a concern.

The factory did have a caulk/seam sealer between the fender and the top inner fender. But, I would put money on it that when the fenders were off the car, the top of the inner fenders got pushed, bent or leaned on. You need to remove the fender and pull that section outward, put the fender on...

Lesonal makes a nice matte clear. Some flatteners can alter the color. Maybe the stuff they used has too much sheen. You could wetsand it with 1000, give it one light-medium coat, let that flash for a half hour, then high pressure low volume dust coat it from over 18" away. It'll give it that...

pm sent!

I painted this one a few years ago for a friend.

are you selling the sport satellite emblems? pm me please

any updates?

If I recall, factory was close to 7/8" wide x 1/16" thick. Trying to find the right size and color can be tuff. I remember using 1"x1/8" one side with adhesive, on a '69 RR coupe.

Make them a tight snug, but don't forget to put some caulk/seam sealer on the screw threads, and maybe some around the hole. Nice color on the "X"!

That's not the car I know, after looking at your pics. It was a 4 speed Dana N96 car. Time for a road trip!

does this car have any NJ history?

how are the floors and rear crossmember? a/c car? any pics? where in NJ? Thanks!