Recent content by 70gtx440dana

I have aftermarket $20 or NOS $35. + shipping from MI 48837. PM if interested. Joe

The a/c vent installs from inside of dash frame. The screws go through plastic vent holes and thread/screw into steel dash frame. You should be able to remove from inside of dash frame. Did you disconnect the ductwork and remove? This should allow you to see the screws on inside.

Nice refurbished 260 dated 2875560 starter. Should be correct for late 70 model year or early 71 small an BB applications. Housing casting 3/70, barrel is date stamped 260 or 26th week of 70 so late June. $275/B0 + shipping from Mi 48837. Will trade for 489 to 070 dated same part number. Message...

You should find the screws in the bottom lower corners and top center.

If I am remembering correctly, in a 69 Coronet 500 you should be able to remove the cast trim piece. This will allow access to the attachment screws for removal. If this is not the case you should be able to get to it from radio removal or glove box liner removal. There are 3 screws holding it...

I have this connector.....$10 + shipping. PM if interested. Joe

If you are looking at the pebble grain dash parts for 69 or 70 B body be warned that the black paint will likely start flaking off the repops within weeks of installation. My recommendation is to get original's and have them re-done by Vacuum Orna Metal out of Romulus Michigan. I use them for...

FYI - Beebest...from your dash photo it looks like you have the incorrect lower pebble grain dash end cap. From what I see you have the non-rallye satellite cap and not the rallye style cap for roadrunner. You can see the silver trim area does not match from one piece to the other. A dead give...

It's actually a 70 rear defrost switch. As suggested the top switch has more wires and different colors. I am interested at $60 shipped to MI 48837.

Yes...looking for nice examples of 68-70 8 track radio as well.

WTB 68-70 B body 8 track parts - fader box, speaker wiring, speakers etc. Looking for nice core parts to support my dash restoration services. Let me know what you have. PM me with details. Joe

I have both the primary and the secondary. PM me for more info. Joe

Thanks on the clock knob offer. I will pass on it.

Also interested in 70 clock knob.

Keep me in mind for the 4144. I will reach out to friend to see if he may have the 4376.