Recent content by 89yjred

What do mean by the frame rails being "salvageable"? Just a couple of patches needed on them? How are the frame rails on the white clip? I wouldn't need doors, hood, deck lid or anything like that. Probably would just like the white clip as it is and the green one with just the suspension stuff...

Do you still have the green back half and the white front clip? If so, what's the story on them? Condition of frame rails, floor pan? Thanks

Ok. Thanks

Do you have the upper and lower cowl section with the steering column and dash frame screw brackets still attached? Need one in really good condition so I don't have to buy a aftermarket that doesn't have the brackets.

I need the upper and lower cowl section with the steering column and dash frame screw brackets still attached. Any way you would be willing to cut one off of those car's and ship it to Michigan? The repop's don't come with the brackets so if I can get a section in good condition I'd rather use...

PM'd you.

1968rt, here is my firewall.

Cool. Thanks for the help.

Sixpactogo, Did you get that 1-3/8 hole measurement right from the firewall? I found a guy by me with an original 68 Charger and his headlight vacuum hole measured 1-7/16" and the tach wire hole measured 13/16". He had an AMD firewall that the hole measured close to 1-1/2". I ask you because I'm...

That helps. Thanks for the info, appreciate it.

Correct. Not to sound like an ahole, but that's why I put it in the 68-70 Charger forum. I figured everybody would realize it was for a Charger if it was in this forum. Although I know now days you have to ask because people just feel like doing what ever they want. All 68-70 Chargers had the...

Nobody has any information?

Does anybody know the hole size in the firewall for the headlight vacuum hose grommet and the tach wire grommet? I would like an actual measurement off of the holes in the firewall. I believe they are around 1-7/16" and 13/16" Also, there is a dimple in the firewall for the tach wire hole...

What kind of undercoating did you use?

I have a 68 Charger getting ready to go to paint and wondering if I should paint the wheel wells QQ1 blue like the body or black. I'm afraid if I paint them the body color they will stick out too much. I'm not using any undercoating so the color will matter. Does anybody know how they came from...