Recent content by A70Runner

Can you remove this light socket from the 70 RoadRunner reverse lights? I have a nice set but the bulb housing wires were cut. Just wondering if it comes apart and who might make repro wiring for them. This isn’t my housings. Just a picture from the web

Fuel Vent plugged?

That’s it. Hard to get a picture of the whole setup under the car. lol.

Have a winters shifter installed on my 70RR. Car is just going back together and ran into a problem I don’t remember having. The shifter linkage hits the trans cooler line and won’t allow it to go into third. Car has a Cope full manual reverse valve body in it. I had a Cheeta Reverse VB before...

Got a 26” from them last year.

74-75 400

Are there different housings? 727 transmission. I have to put a 38 gear in. Know you have to clock the housing. Mine is only marked 21-25. Looked online to figure out how to clock it figuring I would see how. and don’t see any that are like this. All start 26-31 Thanks!

Stock 727 Transmission tube and dipstick needed for a 70 Big Block Road Runner. A/C car if it matters. Thanks!

I used a 1 5/16.

Well…it’s better. At least you can get to it

Yup….

I need a locking dipstick to race.

What’s everyone running for a transmission dipstick tube on a A/C car with a big block? I bought a locking one from summit but it’s right up against the blower motor on the firewall and useless. 1970 Road Runner Sorry no pictures….

1970 RR new M&H dash wiring.(years old, just getting car running Have no power to the accessory side of the fuse box. I have power to the black wire on both sides of the connector on the steering column with the key in run and acc. Kinda wondering if it’s this splice in the harness. Anyone...

Putting a 4-speed console in my 70 RR. It’s an original console car but didn’t have one when I bought it. Question is, is there supposed to be a screw on the bottom by the gas pedal to keep it off the pedal?