Recent content by Aesthetikz

Thanks and Thanks for the offer. I have a pending deal already though, We just hit a snag with the bar needing to be removed. Seller would just be using a standard drill bit to remove them. Can you easily snap a picture of the welds on the one apart? If not, Don't worry about it. - JDB

Does the Vertical Support beam on a 1969 Plymouth B-Body Horizontal Latch/Support Bar (The one just above the grille, That the hood latches to) unbolt? similar to this~ If not: How many spot welds are there? And how big are they? How hard to Re-Weld? I don't have one in front...

Thanks. I did some research and yea, RTV or Silicone in general does not hold up to fuel over time. Also, When using a sealant you run the risk of it smushing inside the float and then getting nasty stuff stuck in your fuel passages. What I'm going to try next is getting some 1/16 Cork Gasket...

12.24.15 - Quick Update: Fuel Pump arrived in record time from eBay and Only 13.99 Shipped. Spectra Brand. It DOES come with a gasket (2 Actually. I was unsure, So I ordered one seperate~It won't be here for 4 more days... Go figure). It stopped raining. But, Would be dark soon. So I rushed out...

Hey Everyone~ 3 Years ago today, I brought home my Baby: Since then, Life has been tough. And it's hard to get through the day sometimes. Because of that, Not a lot of progress has been made. I just wanted to stop in and leave an update of some of the things that have been done, And where I'm...

Here ya go: - JDB

I've always liked Valvoline or Mobil for our DD's. I was thinking of going with Valvoline VR1. But, I have few questions: would this be overkill for a (Mostly) Stock '70 318? What weight would you guys suggest? "Silver Bottle" Conventional or "Black Bottle" Full Synthetic? How many miles...

Do some tumbler and shifter wiggling while yanking the key. - JDB

I would like to get a Locking Gas Cap for my '70 B-Body. But, I have the Factory ECS System... Manual says I need a "Pressure-Vacuum" Cap. And all that is available in Locking/Aftermarket Caps (That I know of) is either Vented or Not Vented. It is my understanding the "Vented" and...

Haven't had any problems with Interstate or Duralast (Autozone). - JDB

Thanks guys. It seems my Ignition Lock is not the one that came with the car. No Console. But, Would like to add one at some point. Thanks for the info. Right now I'm trying to get the Glove Box tumbler out, And it seems you cant do that without the key... - JDB

My Car only came with 1 key, And it works in the Ignition only. I'm looking into buying a lock set and was curious to know how many different keys a 1970 B-Body came with originally. There is 2x Door, 1x Ignition, 1x Trunk and 1x Glovebox. But, What all shares the same key? - JDB

When I got my '70 it did not have a trunk key, Had to crawl in there and unbolt it. Uncomfortable but effective. - JDB

Classic Industries has them~ 68-70 B-Body Restorer's Choice (Officially Licensed by Mopar): 334.99-409.99 - JDB

Put a 2JZ-GTE in it! *Ducks behind desk* :rolling: - JDB