Recent content by airkiller

I have a 68 Road Runner with Rally wheels and T/A 235/60/15 tires. What to get more meat under the rear of the car and I am going to go with 8" Rally wheels on back. What tire size would look good I do not what to go with much more side wall but what to go wider. ANy ideas?

Lets try again Got the 727 in my Road Rumnner back in and it works great now. The problem was that the POS "Boss Hog" Torque converter took a major SHI... and shot metal thropugh the trans. I ABSOLUTLEY DO NOT RECOMMEND These Torque COnverters, THEY ARE JUNK. I had less that 2000 miles on one...

Can anyone tell me what a 68 Road Runner with a 383 would have come with back in the day as far as a gear ratio in the 8.75 rear end.

I havea 68 Road Runner with a 727 that I rebuilt about 1 year and 2,000 miles ago. It is now having problems. I have noted the fluid totaly fouled with aluminum and the trans wouls not shift into any gear when hot. It was flushed and found that the fluid was like sludge in the bottom of hte...

Anyone have a 426 hemi for sale?

WHat about he K-Frame? I have understood that the Hemi equipped cars had a different K-Frame from the other big blocks?

Ok so here is the story. I have a 68 Road Runner clone with a 383 in it. I love the car but have ideas of upgrading to a 426 Hemi. WHat would have to be changed from the stock set up for the 383 to accept the 426. Does anyone know were to get a decent rebuildable 426. I would like to build one...

Bad news, but we shal overcome! Thanks to those guys that came by and said hello at the Mopars in the Park event this past weekend. Unfortunatly the Road Runner suffered a total loss of transmission power upon arriving at the event. I literally had to push the car into position. At the end of...

Have the same issue with my 74 Duster. It is the turn signal switch. Need to replace it, just to busy to deal with it at present.

I found the packet from the performance shop that built the engine. Here are the particulars: 1) Holley 0-80870 Carburetor, Street Avenger, 870 cfm, Square Bore, 4-Barrel, Electric Choke, Dual Inlet, Silver 2) Eldelbrock Performer 383 INtake Manifold 3) Comp Cams 23-224-4 Cam Shaft...

I have to buy a dial type timimg light to get an exact number. I remember that the speed shop that "tuned" it said that timeinwas on the order of 38 degrees or something like that. I am not up on the finer aspects of tunig a non stock engine so pe patient with me.

I plan on entering my 68 Runner and my 74 Duster in the Mopar in the Park event. Mybe some of you can stop by and say hello. I am trying to tune these monsters and am not really up to par. I can build them, but making them sing I need help with.

I ordered a 700 CFM carb from Summit and they sent me a 800. I have a pretty agressive cam from Comp Cams and the heads are a set that were ported by a racer here locally. The speed shop sold them to me as the heads I got with the engine (In a box) were not very good. I can not recall the...

DO you have any idea what the part number or were to get this part.

The car seems to be running way rich at idle also.