Recent content by Airwolf222b

I spoke with summit yesterday. Based on my current setup they recommended this Cam. Have any of you ever tried this one? He said I wouldnt have to do anything to the car other than install the cam, that my particular engine, compression and current parts would all work together great.

Summit Racing SUM-6920 Summit Racing™ Muscle Car Replacement Cams | Summit Racing Would something like this with my current set up work?

I'm not sure exactly what they go for. I could do more if I had to but thats where I'd be comfortable.

I currently have 3.55 gears. when you say 340 cam are you talking about the stock cam out of a 340 LA Mopar and leaving my exsisting heads?

Thanks for all the great suggestions. To answer a couple questions I guess I would like to see if I can get another 30HP or so out of it without any major work. I also know I've got a lower compression engine due to it being a 1973 so I'm just hnt sure what my best options would be. So I'm...

Hello again everyone. Still working with my 73 Roadrunner with a 318. I'm looking at upgrading the stock cam. The engine runs great, but as per most folks around here, I'd like a little more power. Right now I'm working with an almost stock engine with some bolt on upgrades. I've added...

With swapping to aluminum heads is there anything else I would need to change?

HAHA. I'll bet it would. I'm thinking more along the lines of 20-30hp increase. A little more torque. $1000 budget range.

So this is a basically stock 318 in my 1973 Roadrunner. Lots of replacement parts but not many upgrades outside of Intake, Carb and Headman Headers. I'm not looking for a lot more power but still wish I could get a little more out of her. adding 3.55 gears made a pretty big difference. But...

Just swapped the highway gears I had (2.73 i think it said) in my 73 RR to 3.55. I highly recommend. After reading several posts in this forum of guys who had made the swap I gotta say it made a pretty big difference. My little 318 went from a decent little cruiser to a cruiser with a little...

I'm having a hard time finding seatbelt mounting hardware for my Roadrunner. The origional hardware was missing when I bought it. I've bought two different sets that were supposed to fit but didn't. Anyone have any luck replacing theirs and do you happen to know a part number? Thank you in...

1973 work in progress. Just had the trans rebuilt. 318 with a few upgrades.

I tried to find these. looks like they dont make them anymore? But I did find the Hooker Competition Headers on Summits site. Model 5901-1HKR. I wonder if theres much difference? They also have a pair of Patriot Headers, H8206-B that seems like they should fit my setup. Are patriots any good?

Hey everybody. I need to replace my headers on the 318, 1973 Road Runner. I bought a set but the power steering is in the way. Anybody out there have any suggestions on what might fit? Thanks in advance! Nick

If you've been following my progression at all heres a little update on how things are going. With a lot of help from this forum! Quick history of the car - It was found in storage by a coworker who went to buy another car. The guy would only sell it if he took the "other one". The "other...