Recent content by alteredpilot

Yeah, we noticed that the rest of the gauges are moving real slow as well. likely the regulator. thanks again

10-4 thanks!!!

So the temp gauge is doing something really squirrelly. From cold to almost normal temp it rises nice and smooth like it should, then just as its approaching operating temp, it will jump to just under 230 then slowly creep back down to normal. I thought the sender might have a dead spot so I...

does anyone have the correct part number for a repair kit for a KH86166 caliper? thanks in advance.

any idea what they look like and where to find them?? could you post a picture of the FSM so i can check it out?? thanks.

exactly. its not the pad. i'm trying to figure whats up with this thing...

These are the pads. no clips. they sit in a bracket and ride on pins. '69 fury

I have a '69 charger with a clunking inner brake pad. I got the car with the disc brakes already installed and the pads and rotors appear to be from a '69 fury. it has D85 pads on it. The whole setup only has about 300 miles on it, but having installed enough kits, I know that you can get bad...

its the little rake or comb inside the transmission that activates the switch. automatic

i'm under a '69 charger with no reverse lights. They work if you jump the harness, but there is no continuity in the switch. Its a practically new switch (which doesn't mean much these days). I seem to recall reading somewhere that the rooster comb is different between the '68 and earlier. I...

i'm under a '69 charger with no reverse lights. They work if you jump the harness, but there is no continuity in the switch. Its a practically new switch (which doesn't mean much these days). I seem to recall reading somewhere that the rooster comb is different between the '68 and earlier. I...

Thanks for the replies. It was the limiter.

no

OK i put a new one in there yesterday. over the counter parts are hit and miss these days. Edit: swapped it out and everything is working beautifully! Thanks!

Its got a new one in there... but we all know about the quality of over the counter parts these days... any way of testing the regulator? this is the first time i've ever had my hands on one of these setups.