Recent content by b569Charger

I was told verbally today they are going to make this right. I will be sure to follow up with the result

Indeed. I should try. But why does it always needs to become a project. I thought I would change the carb on the 440.... nope, I guess I'll blow the day tomorrow on the phone instead.

Hello! So just a little over 6 months ago, I ordered a 69 Dodge Charger "premium" grille set. It was a $1500 part but they were running a sale. Which brought it down to about $1200. I could of SWORE it said at the time if the part came in shortly (I thought it was like 60 days) I would get the...

Looking for a decent map light wiring harness, and the map light its self Mine had the little ignition light as well

I am replacing my headlight doors because the sides of them, where the brackets bolt on for the headlight motors, have broken off plastic tips/ ends where the screw holes should be My question is: mine is a R/T, so there is a flatter spot on the face where the metal R/T logo goes on Will...

I used the chat window at Summit racing and they suggested a reasonably priced vacuum booster. Was maybe $235 or so. It is a unit that is electric and creates vacuum

Here is the cam card...I assume it's still in her

I, too bought a disc brake manual to power conversion kit (by MBM), but I hear some say if you have a big cam, you won't have the vacuum to operate it. I think my cam specs are listed below...I don't know if this is considered a "big" cam or not (???) CLAY SMITH ENGINEERING CAMSHAFT: Model...

Is that an all stock motor? I don't know anyone else around me that doesn't have a 440 without a big cam, headers or something. I am just curious if that is the "stock" motor idle

Thanks for your help! I guess on mine, the 2nd number is a 5 rather then a 6, so I couldn't find info on it. When I changed the number, "presto". It seems to be the "M1 Single Plane" intake just like you said, thanks!!!. Now I just need to figure out if it's any good, and if I should keep it. I...

So on the subject of mystery intakes, anyone ever seen this one? While I think the carb is newer, I think the intake is quite old. It says Mopar on the front, and on the back it says BB then P 4682174 (or at least I think it's a 4 on the end). Google searches come up empty. I don't know what all...

I'm missing one of the 4 bolts on the firewall that at this point holds the master cylinder on... so I hope that is easy to fix and find...gulp I, too, am looking to convert to power brakes from manual ASAP, but due to a built up engine there is concern of enough vacuum to run the system. A...

OK, I think I got the picture now The fender well crack does indeed seem to be a thin layer of bondo. It looks like in a past life a very old repair was done http://www.autometaldirect.com/1967-Dodge-Charger-amd-66-70-b-body-front-inner-fender---pair-md-38-p-436.html I jacked the car up and...

I am marking as sold since there doesn't seem to be any option to simply end it.

But had time to reply