• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Bogey

  1. B

    Still looking for a decent used 18 spline...

    Hello, Are you still just up the street from Driveline Works? I have been patiently waiting for engine order I placed in Feb 2022 and cannot get him to respond to emails or answer phone. Thanks for any info you can provide... Steve
  2. B

    Looking for header suggestions

    Hey 69 Charger#2, if you don't mind me asking, what was the part number you went with? Also what dia exhaust ID? Working on 68 RR 440 myself and trying to plan ahead. Many thanks
  3. B

    PST Tubular Upper Control Arm

    Thanks to all for their inputs. Here's images of the drivers side (left) but Upper Control Arm labeled as Right. Looks worse aligning to bump stop and notice how the ball joint is tilted towards the front when parallel to the ground. Looks like 1968VAGTX is right in that I need a different...
  4. B

    PST Tubular Upper Control Arm

    Right, I was thinking So the one marked left is really the right side? When I compared other with it it looked like it would be much worse. Going to swap with other and post pics afterwards. Thanks all
  5. B

    PST Tubular Upper Control Arm

    Thanks for the reply, thought the same bit compared right side with it and it would be much worse
  6. B

    PST Tubular Upper Control Arm

    Thanks for the reply, thought the same bit compared right side with it and it would be much worse
  7. B

    PST Tubular Upper Control Arm

    Hello all, Starting to assemble front end which includes PST Tubular Upper control arms. I fitted drivers side but see that the factory bump stop will not make contact with the arm. Is this a problem and if so, can someone recommend bump stops that fit the application? I didn't see them on...
  8. B

    Stock ignition wiring to MSD

    Meant to thank you earlier. Got exactly what I needed...Thanks again
  9. B

    Stock ignition wiring to MSD

    Hello all, I'm sure this horse has been beaten but I haven't been able to find what I'm looking for. 68 RR was priorly converted to electronic ignition. I am now converting entire starting circuit and electrical to MSD. Aside from tying the ballast resistor lines together I would like to know...
  10. B

    68 GTX need diagnosis help

    Hey all, jumping in. I am now in the process of converting electronic ignition (Orange box, voltage regulator) and am moving to MSD for EFI box. Is there a drawing somewhere regarding how to properly remove the old schematically? Appreciate any help or Leads...
  11. B

    383 engine decode

    Thanks all for the quick replies. Very much appreciated. Here's a pic of the pad by distributor. F383 followed by 69 and lastly HP
  12. B

    383 engine decode

    Happy new year all. I'm trying to decode engine block from running 383 I just pulled. The casting is 2468130 8 followed by a DN below. Not sure what the DN references. Also the serial number is 0B276819 and not sure what the B means? Any help is greatly appreciated. Am replacing it with 440 so...
  13. B

    MSD 6AL location?

    Makes perfect sense (now that is). Thanks for taking the time to help...all the best
  14. B

    MSD 6AL location?

    Hi all, I'm sure this answer is somewhere just cannot find.. I'm having engine rebuilt and was told that I would need msd6al or equivalent control for the build of it. Car was converted to electronic ignition from prior owner (orange box). In looking at wiring for these boxes, it states that...
Back
Top