Recent content by Builderguy

Looking for a good used radiator for my 1974 Dart project. I have a two row, #3692 915, that is beyond saving and to re-core is $$$$$$$$ Thanks Ray

^^^^^^^ Please spill the beans on what happened, as long as it won't cause problems.

The wife and I picked this 1974 up not too far from home. Spent most of its early years in TN then parked in 1999. Not much rust at all. This will be the next job as it is easier/faster to do than the challenger. Maybe done by mid summer? PO replaced the 318 with a 360. I will just replace the...

I have always liked Lauren Bacall.

I have done a lot of 73 RR's and none have had this hole. Looks like a PO installed something, maybe a CB Radio! Just kidding, no idea what the hole was used for, but not factory IMHO.

Then and Now, $13.26 later, not perfect but good enough!

Christmas presents for me! Ultrablend shaker and a Jeg's ?? parts washer. They are older, but they work as they should and only cost $50 a piece. PERFECT

Merry Christmas to all!

Picked up the new compressor today. A little lower CFM than I wanted, but for $499.99 (after being on sale and the $150.00 rebate) I will learn to adapt. A forced sanding break every now and then might not be so bad!

Built the wife a pantry a few weeks back, and today I finished putting the shelving in it. Carpet and trim is all that is left.

Installed a Slinky on our pole style bird feeder. We had a squirrel problem. They would simply climb the pole and eat everything! Tried spraying the pole with Pam, WD-40, and a bunch of other very slippery stuff. Too cold around here and they all got stiff enough that the tree rats could...

It is out! There were only two bolts that were a real PITA, rest of the job was pretty straight forward but I would not recommend it as a hobby. Now back to posting better stuff!

I really wanted to have this thing out tonight but it is getting late, so tomorrow it is.

Just the pic, it is straight and true. I don't call it a bolt anymore, I just call it misery!

Not working on MY car, but I am working on my oldest son's Escape. BTW, Escape is commonly said to mean, "Engineering Slowly Comes After People Explode" and yes, I just made that up. Anyway, their transmissions are known POS that fail on a regular basis. This one was purchased with a blown...