Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thought I'd update the thread in case it would help someone else.
After your advise, I decided to disassemble my unit and try to fix it. I tapped out the rivets and got to work. Testing it with a multimeter made it quite clear that it was the connection between the wire windings and the...
Hey all,
I was curious about where others have taken their 12v keyed source from when making the ammeter to voltmeter conversion. I saw someone else taking power from where the condenser is connected on the cluster (the image from "OzCharger69":DIY voltmeter mod for 2nd gen Chargers - Page 5)...
@threewood Thank you for the response! That sounds promising, so am I understanding you correctly in that you basically used the cutters to form the part of the pin marked in red, so that it fit through the hole and then at the end, tapped it with a hammer to make it wider than the hole again...
Thank you for the replies! My oem unit doesn't look too bad, but it is oxidized and doesn't give the expected readings when measuring it, which I believe is why my dash lights aren't working.
You've encouraged me to maybe just try to fix the old one. Did you drill out the rivets and replace...
Hi,
I was curious to know people's experiences with the OER dimmer switch (part number MB16951). I recently ordered one from a supplier in Sweden and was quite dissapointed with the quality of the product. Firstly, there is a lot of play within the wheel itself, making it a bit wobbly and cheap...
Hi, I am lookng for a single Wheel vintiques Magnum 500 wheel in 15x10 with 5.5 backspace if anyone has one available.
It needs to be in new, or very good condition.
Thanks!
Hey @71Beeper that looks awesome! I like that the light seems to spread evenly. I saw in another post that you got them from superbrightleds. Are they the ba9s style?
I found these on their site, but they are stated as non-dimmable, are these the ones you are using?
BA9s LED Bulb - 5 SMD LED...
Okay excellent! I will also be doing an auto to tremec conversion so it sounds promising that I can make it work, even if it will take a bit of tinkering with the mounts. Thanks again for the help!
Hey, thanks for the reply! Yeah that makes sense, it seems like the oem type attaches to the shift linkage either by slip-in attachment (1970 only?) or two bolts. I guess the question I need to figure out then would be how the location of the shifter mount on the tremecs differ from the oem...
@Kern Dog I hope you don't mind me tagging you, but I found your great thread on TKO/TKX swaps and have started looking through the work you've done. Did you get your long shifter directly from the company you bought the TKO from and do you know if its using the same mount as the old pistol grip...
I was curious to see if anyone had mounted a 71-4 Bench B Body pistol grip shifter in their 68-70 console B-body and especially if it's mated to a tkx/tko
I'm planning on doing a tkx swap on my 69 Charger with Auto and console and I would like to get a pistol grip shifter when I do. I know that...
Thank you so much! It wasn't black originally, but B3 blue with a black vinyl top and the blue interior it has. I think that's a pretty cool combo, but I've always wanted a black 69 Charger, so I'm not planning on returning it to original spec. I was thinking of maybe changing to a black...
Awesome, thank you very much for all of your tips, I'm gonna check them out and see if there's any particular product that is readily available here in Europe.
Sure! Here are some more pictures. I'm quite happy with the way the car is currently, so I'm mainly trying to preserve it, while making...