• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by cmansell

  1. C

    New Museum Cartersville Georgia. Savoy

    I was there opening day, nice crowd. That is the landy challenger on dispay out of Werner collection.
  2. C

    WTB 1969 GTX Trunk Panel

    Most people use the repo'd finish panel. Nice used ones are rare, most will need to be redone and that would cost near as much as the repo
  3. C

    Mopar plug and play engine harnesses

    No, trucks are different. Don't try it with anything but a 2016 or up challenger engine.
  4. C

    Flash rust problem

    I did it on a rusty roof of a car. Stripped the roof, used rustmort. Then I used all metal on the worst pits and spi epoxy followed with 2k primer. That was in 2007 and no problems yet.
  5. C

    Drawing Social Security early or not?

    I signed up yesterday, I will be 62 in a month. I retired after 30 years at the age of 53. I thought it would be bust before I got to this point. My father passed at 58 so waiting till 70 for full benefits never crossed my mind.
  6. C

    My 64 Max wedge

    Contact Darrell Davis with your vin to verify if it a true max wedge. He May have history if it is.
  7. C

    Bill Rolik fuel sending unit

    Slap that thing in and tell us how it works. I have been happy with parts from Bill.
  8. C

    6.1L Hemi Swap new Gauge Cluster.... Classic Dash VS Classic industries

    Anyone using the mopar plug an play harness, this is what I have?
  9. C

    6.1L Hemi Swap new Gauge Cluster.... Classic Dash VS Classic industries

    So If you use a converted cluster are you still using the old dash harness f or the lights, wipers and all the other switches in the dash
  10. C

    Dash

    On my 69 gtx the lower pad first, then the center a/c vent as one leg goes under the switch panel.
  11. C

    Wanted: Hemi Engine and Carb Tuner in Tampa Area

    There is an old man in Ocala that's been tuning on hemis for most of his life. Not hard to find, has a museum in his backyard.
  12. C

    Oil pressure guage pegged high. New sending units. What can cause this?

    I bought 3 new ones that read wrong, the one on it now that reads closet to a known psi is a used one for a 6 cyl cj jeep.Go figure.
  13. C

    70 k-member with skid plate

    I paid 200 for a correct k member that had been blasted and painted.
  14. C

    Soon To Start 1970 Roadrunner Project/ Like to see your tips and pictures

    A 70 manual shift car is tough to build correctly, one year only shifter bell housing and column. Safety switch for clutch and rods and levers for the transmission are different. Any one year only car makes parts searches limited. Research is your friend, a part may fit a 70, but is it the...
  15. C

    For the bikers ! What did you take your road test on?

    79 Honda cbx. Not a good choice for the low speed obstacles.
Back
Top