• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by cwhubb

  1. C

    spread to square bore

    they are really good for stock units, I have a DP4B that i want to use
  2. C

    spread to square bore

    didnt know that, how do they cause flow loss?
  3. C

    spread to square bore

    I looked again, yes they have them, just to verify is this the tq to square manifold side? on second look yes they are, thanks
  4. C

    spread to square bore

    thanks, I looked at their site, all i could find were square to TQ adapters. I'll look again
  5. C

    spread to square bore

    who makes an adapter to put a TQ on a square bore intake? I have a TQ that I want to use on my DP4b. Thanks
  6. C

    440 rods and ci

    thank you all, question is answered
  7. C

    440 rods and ci

    thank you thats what I was looking for
  8. C

    440 rods and ci

    correction, I meant to say a shorter rod
  9. C

    440 rods and ci

    really, I thought a longer stroke used more of the cylinder and that increased ci
  10. C

    440 rods and ci

    wth does have to do with the question, you're chasing rabbits. you can marry a 6ft 130 lb woman with a super model body too but that doesnt make her any less ugly either.
  11. C

    440 rods and ci

    thank for your answer, but please stick to the subject. by the way, yes you can if you get the pistons from diamond and the pin end is 990.
  12. C

    440 rods and ci

    What increase c.i. wise, if any, will 440 rods yield in a 383?
  13. C

    lefty loosey?

    update... I got the bolt out. I sprayed it with blaster then used a 1 1/4 6 point socket, a 2ft 3/4 breaker bar with a 2 ft pipe on it and muscled it off.
  14. C

    lefty loosey?

    the engine isnt installed in a car
  15. C

    lefty loosey?

    yep, I give up, 230 lbs on a 2 ft bar did zero lol
Back
Top