Recent content by decker49

W T B i am looking to buy a good Hemi torqflite case. I need a case for a 68-69 or early 70 for my Coronet. Mine feel of the stand and broke in half, please help if you can,thanks Don

Do you still have 727 hemi tranny if so please let me know [email protected] thanks. If you do not have if you know of one please let me know. Thanks don

Do you still have the 70 block. Thanks don

does anyone know where I can buy the plastic window grommets the bolts go thru to hold the window in place,I have tryed RT Specialties and yearone. HELP! Don

It is original I justr cleaned it up

Yes it is B 7 I just wish I was done I need to install the interior and button it up.

It had two rust spots behind rear quarters cut them out and leaded in and finished. No bondo anywhere we metal finished whole car.I thought with only nine Hemi Auto's ever built I should finish right.Talking about the wheels the build sheet shows rear strip delete and full wheel covers kinda...

It has taken me almost 8 months to dismantel put on Rotessorie and put back to gether her are a couple pictures

Thanks alot, between my shaft and tube I do not have a dust shield or bearing but between the tube and outer housing I have the white plastic bearing is this the way yours is. I cannot tell for sure from the pictures. thanks Don

I could use some help decoding a 67 Plymouth Satellite top line under A-6 under B-5 under D-6 second line A-6 B-2 C-5 R-1 last line SO BDY TRM PAINT BO NUMBER402393 RP23 P4X ZZ1 B If you could help me I would appreciate it. Thanks Don

does anyone have a detailed picture of the bottom steering column where main steering shaft comes out of tube I am trying to see if there is just a dust shield or bearing at the bottom of the steering column I need to see if I am missing any parts.Any help would be appreciated. thanks Don

70 coronet r/t does anyone know which lower bearing I need to get for my steering colum mine does not have any holes so I do not think I use a 3 or 2 bolt bearing please let me know if you have a picture and which bearing I need. Don