Recent content by dodge68charger

Just clip heights on the sides/bottom and where you measured from on the corners. Top holes were already there Thank you!

I marked the locations. Just not sure on the corner hole locations. One says 4 1/4’’ from the bottom corner, one says 5’’and my parts charger looks like its at 4’’ lol Should the clips sit flush at the bottom or a bit lower is Ok? Thank you

Thank you

Are the window clips around the front and rear windows mounted the same height as the non vinyl top cars? I think i held the clips lower about an 1/8 inch when i had to drill new holes

Thank you

Perfect. Thank You

Looks like theres a slot in there for a screwdriver for adjustment Or just crack it

Just crack it a push the window down ?

Thank you!! I ll try it out tmrw morning

Is this gap pretty common on the chargers? Done a few and cant get them to line up Mind you I never test fitted before paint

Isnt the chrome trim supposed to be on the inside for chargers due to the door trim top molding or both inside and out?

Thank you. Just curious which one that is

Hey guys, Need to install the door fuzzies on my 70 charger but had a hell of a time How do i lower the door glass? Someone said loosen the stop. Couldnt see one Also the chrome strip to the inside?

Thank you. I will call on Monday Hopefully they have some

Hey guys just wondering the best place to get front/rear window trim clips from for my 70 charger? Also does anyone have spacing/height to mount them around the window. Do they sit flush with the body or mount a bit lower? The car does have a vinyl top if that matters. Thank you