Recent content by Dominic

-maybe check the float levels of the carb... needle/seat going bad, letting extra gas thru? -carb throttle linkage or butterflies hanging up, causing them to stay a little open? -might still be a vacuum leak hiding somewhere, maybe on the carb near throttle shaft area. I know on Holley's the...

nice charger! For the idle drop, first thoughts that come to mind is possibly a vacuum leak? Maybe timing is off? Should get out the timing light and see what's going on... at that high of an idle in park, maybe the centrifugal advance could be operating--> idle drops when put in gear --->...

1970 air grabber style would be great color doesn't really matter to me

Looking for a six pack air cleaner w/ base in decent condition. thanks

Buster the doberman

either works.... I like the way mine turned out with "Race Hemi Orange"

I use 3 inch dual electric cutouts w/ 1 7/8ths TTI headers... work well and sound bitchin'... Usually closed on the street, but sometimes I gotta give a ricer some of that Mopar sauce and uncork it. Eh, sue me! Or at a car meet I roll with it opened up, because who doesn't want to hear a...

Could incorrect tranny fluid be a cause of the clutch slipping at higher RPMs though? I wonder if that's a clutch related issue...clutch fork maybe? oily flywheel? idk

Comparing the two I have these specs: Current Trick Flow installed valve springs- 1.550" O.D. dual spring with damper (TFS-16094) 138 lbs. @ 1.950" installed height 430 lbs. @ 1.250" open 420 lbs. per inch rate .680" maximum lift Recommended Comp valve springs for my cam(925-16)- 1.509"...

Thanks, and I was thinking that I also have a set of 1.7 ratio roller rockers available too. This would raise the lift to about .610ish I believe. Assuming those fit with piston clearance and all that, is there any downside to using the higher ratio rockers? Would that be more appropriate for...

Hey guys, I was wondering if you think these valve springs for a 440 build would work for my setup... The heads I have are aluminum Trick Flow 240 (TFS-61617802-C00) with valve spring specs: 1.550" O.D. dual spring with damper (TFS-16094) 138 lbs. @ 1.950" installed height 430 lbs. @ 1.250"...

Sounds like it was running lean, one way or another.. Do you have an electric fuel pump by chance? I just had a similar situation happen recently where: car was dying up hill, struggling under load sometimes, etc... Turns out my 20 year old electric fuel pump finally quit. Popped a new one in...

Hi everyone, I want to alert you that there is a petty scammer going around here on the WTB section. I posted a WTB ad for a p/s pump pulley, and got a PM from a random account telling me to email their "friend" who has one. I contacted the guy's email provided and he had pics of the pulley...

@oldkimmer I would like to buy this pump if, it's for sale Kim. Let me know -Dom

Hi Kim, thanks for the pics. But your inbox if full. Could you PM me when you get a chance? Thanks!