• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

dvw's latest activity

  • dvw
    dvw replied to the thread Rebuilding LemonWedge..
    I ran gaskets on the plate on my previous car. After a while they would leak. This car has used Ultra Grey with no gaskets for 13 years...
    • racecar 380.jpg
    • racecar 406.jpg
    • racecar 428.jpg
    • racecar 429.jpg
    • racecar 446.jpg
    • racecar 470.jpg
    • racecar 456.jpg
    • racecar 431.jpg
    • 0520121701a.jpg
  • dvw
    dvw replied to the thread Rebuilding LemonWedge..
    I know where that limiter resides. Mine has not only all the firewall holes welded but the air intake for the heater in the right A...
    • racecar 566.jpg
  • dvw
    From the results I've seen with throttle pressure cable vs linkage there always seems to be a lot of trouble getting then to function as...
  • dvw
    dvw replied to the thread Weird Race at NHRA World Finals!.
    Thinking outside the box Chad Weber took the no ladder format to his advantage in Super Comp. He and his dad hurried up to be first in...
  • dvw
    dvw replied to the thread Rebuilding LemonWedge..
    During my dealership days I was the suspension guy. Worked very closely with our body shop doing the parts replacement on a lot of...
  • dvw
    dvw replied to the thread Winters Shifter Problem?.
    I'd like to see a larger picture od th eentire set-up. As I remember this shifter a rear exit cable design and uses a bell crank to...
    • 1763294948821.png
  • dvw
    I believe those were done by Westlake. I know a guy that worked at Koffel's that was a local oval guy. He had a pair that he raced with...
  • dvw
    dvw replied to the thread Rebuilding LemonWedge..
    Use the 3 prong neutral safety switch. Connecting the outer 2 pins to power and the reverse lights will activate them. I was all...
  • dvw
    The K frame in my car has been heavily tested. 1250 runs over 13 years with wheelies every pass. The flanges were trimmed and tack...
    • racecar 676.jpg
    • racecar 675.jpg
    • racecar 672.jpg
    • racecar 117.jpg
    • racecar 116.jpg
    • racecar 115.jpg
    • racecar 114.jpg
    • racecar 113.jpg
  • dvw
    Never checked the cranking compression. I was originally shooting for 9.5-1. But my machinest cut the heads a touch to much. Doug
  • dvw
    A-body Dodge Dart or Plymouth Valiant with /6.
  • dvw
    I built a 440 for a friend. He wanted it near stock with a very smooth idle. Used quench dome pistons. Equalized the depths of all the...
  • dvw
    dvw replied to the thread Rebuilding LemonWedge..
    Fitting the alternator isn't to bad. If the water pump housing is milled the thickness of the plate all the pulleys will still line up...
  • dvw
    dvw replied to the thread Rebuilding LemonWedge..
    I'd put a motor plate in it. Then any K frame will work. 6 cylinder ones are cheap. Doug
  • dvw
    dvw replied to the thread Weird Race at NHRA World Finals!.
    We run lots of stuff with no time trial. But usually have been there the day before. That being said with good weather prediction most...
Back
Top