dvw's latest activity
-
dvw replied to the thread Mechanical six pack question.I ran one many years ago with a 4 speed. It didn't bog but it wasn't fast either. Running on just the center carb with the outers... -
dvw replied to the thread Big Thanks to the Help on my Last Problem and now....something new.Make sure the regulator is grounded well. If it isn't, it will over charge. I'm assuming this is an original single feed wire (along...
-
dvw replied to the thread Rebuilding LemonWedge..I agree the 9 second zone is more intense. I didn't mine doing the cage and other minor stuff. The pain in the but is recertifying the...
-
dvw reacted to Fast Savoy's post in the thread Factory Appearing Stock Tire (F.A.S.T.) or Pure Stock Racers with .It is a great class with really good people and lots of fun! I have one for each class.
-
dvw replied to the thread Rebuilding LemonWedge..Anyone can do a nice job. Just depends if you want to take the time. My cage took a while. But I was told if if was going to be tigged...
-
-
This past weekend went out to Rockingham Dragway for the last Modern Street HEMI Shootout race of the year with Mopars at the Rock. In...
-
dvw replied to the thread Winter plans for the Roadrunner.I had trouble with vacuum leaks that I thought were at teh corner of the tray. Turns out it was the very upper corner of the head...
-
dvw replied to the thread Rebuilding LemonWedge..Metal finished is just basically finished welds. Thats why when the tunnel was welded in, it was welded on both sides to add more...
-
-
dvw replied to the thread Looking to buy a front Coilover kit.Be careful adding a ton of abitrary caster. From the Chrysler tech paper on bump stee; For every one degree of caster change the outer...
-
dvw replied to the thread Rebuilding LemonWedge..The trans tunnel. Cut th.e hole leaving the throttle pedal mount and the stock tunnel are from the torsion bar cross member rearward...
-
-
dvw replied to the thread Looking to buy a front Coilover kit.It was a newer QA-1. I was told was their later deal copying Gerst. I haven't seen a Gerst so don't know about them. When asked about...
-
dvw replied to the thread Looking to buy a front Coilover kit.I've installed them and driven them. They're expensive, (Over $5K) not much lighter, the bump steer takes a huge spacer to straighten it...
-
-
dvw replied to the thread Removing Inner Front Fender Panel.The two items that were a great help for access was pushing the firewall back and enlarging the trans tunnel. The firewall goes back...
-
-
dvw replied to the thread Removing Inner Front Fender Panel.The ony thing that is tough is the #5 plug. And that due more to header design than the inner fenders. The motor can be out in 1 hour...
-
-
dvw replied to the thread Removing Inner Front Fender Panel.The weight you remove isn't worth the amount of effort. The top of the shock tower is an integral part of the suspension. In fact if the...
-
