Recent content by E5charger

The spring attaches to the lower collar (housing), on the steering column, which has the finger lever that you depress to remove your key. The spring rotates the collar back to it's original position when you release the lever. You can buy the three floor shift reproduction collars to replace...

You can now buy the steering column spring to complete the conversion of your column shift to a floor shift. Mr Moparts is selling them. Sku: CHZCOLSPR

Welcome from Winnipeg

Has anyone replaced their 74 leaf springs that have the oval bushing? What did you buy? Did you have to replace the front spring hanger with a longer one? I realize there aren't any with the oval bushing, but just want to be sure the measurements are correct. Do the Mopar Performance work as...

The Factory Shop Manual for my 74 Charger says to use the same number. 2084329 or equivalent. Right below that it says "Do not use Automatic Transmission Fluid". All I was able to find says Chrysler MS-5931, which is designed for use in Chrysler vehicles built before 1998. It should be clear or...

I do plan on going to Carlisle one day, but not this year. Who is Serge? Does he have a company or does he sell used parts? Does he have a website or Facebook? I'm thinking Moparfest may not be worth the trip, unless I add it to a vacation in the area. Thanks for your detailed reply.

I have never been and am just wondering what vendors with new restoration parts are there. I've seen videos of the great cars and heard it's a large swap meet, but what about new parts? I had a great time at Mopars in the Park, but with the tariffs I'm looking to stay in Canada this year? Just...

Here is the second handle I have.

The jack and base are likely correct for a 74 since I bought the car in 1977. I'm thinking the shorter handle is the correct one and is like the first photo you posted.

It is very possible different plants would have different colors. My car is from the Lynch Road plant. I have two different tire wrenches so I'm not sure which is correct. One is shorter than the other. The shorter one looks like the one in the photo you posted. The grey is a bit lighter than...

My 74 Charger has a jack and base the same color as Vaanth's 73 Duster. Both are grey.

Here is a YouTube showing a simple length of chain.

Does anyone have a photo of the lower bearing installed on a floor shift steering column. The 74 is different from the 73 and older. I know a ER-16 bearing will likely fit, but I may want to go original. Thanks!

This is likely the same from 71-74. This is the outer wheelhouse that meets the trunk drop-off and trunk floor. The section circled in red goes under the inner wheelhouse, but it is flanged up a bit. For those of you that have done this before, did you hammer and dolly it flat or cut off the...

I purchased the AMD passenger side wheelhouse and have read it would need to be modified for a 74 Charger. I'm just in the process of removing the old rusted one so haven't tried it yet. Has anyone changed a 73-74 outer wheelhouse and can tell me where it will need to be modified. I've search...