Recent content by erk_f-100

I have to proof read my enties better. Of course I mean 23 spline. The input shaft from before 1970 had 24 teeth while the 71-74 had 25 teeth. I need the early type with 24 teeth

I'm converting my 2.47 to a 2.66 and wondered if anyone has a 21 spline input shaft with 24 teeth for sale. I have the imput shaft, 2nd and 3rd gear and gear cluster for the 2.47 (and an A body tail and output shaft )left over and for sale if I get a usable imput shaft , but I live in Norway so...

Does anyone have a copy of the Mopar Muscle march 2004 article on A-833 rebuild gear grabbing i could buy? I'm trying to change tails / rebuild my A833.Also needed is a factory service manual. I have the 70-74 non overdrive A833. Or just anything else that would help!Thanks Erik

Does anyone have a copy of the Mopar Muscle march 2004 article on A-833 rebuild gear grabbing i could buy? I'm trying to change tails / rebuild my A833.Also needed is a factory service manual. I have the 70-74 non overdrive A833. Or just anything else that would help!Thanks Erik

the early polysphere was based on the Hemi block and were built in displacements of 241,259,270,301,325,331 and 354. the later polys can not be converted to hemi heads, BTW they used the 1955 tripple nickel 331 heads with spacers. These heads breathed better than the 392 heads