Recent content by Fast340cuda

Up for sale are 2 of my extra 15”x6.5” steel wheels. Both are made by Kelsey Hayes and have a 5 on 4.5” bolt circle but they are different part numbers as shown in the pictures. Wheel p/n 4037723 seems to be a heavy duty version as it is 2 pounds heavier than the 4238040. Both are in very good...

Up for sale is 1 15”x8” Ramcharger steel wheel. Part number is 3821550 and it has a 5 on 4.5” bolt circle. Wheel is in very good condition only having minor surface rust in a few areas as shown in the pictures. Looking to get $175 plus shipping. Package size is 20”x20”x11”, weighs 30 lbs and...

Looking for 1 15x6.5” large bolt pattern steel wheel or a pair of 15x6.5” large bolt pattern rally wheels for my 71 Demon project. Let me know if you have a spare or two sitting around that you can part with! Thanks FBBO

I’m building a 493 with trick flow 270 heads, 11-1 compression, and the same Indy dual plane intake. I had Ray Barton order me a custom flat tappet from Bullet. I think your current cam is a little small (I know mine isn’t a roller but may help as a reference). Here are the specs from mine:

Mag wheel cleaner has worked pretty well for me.

I have one in California.

Looking for a decent pair of stainless dodge redline hub caps. I have managed to collect 2 for my project but need 2 more. Have a spare or two that you would like to sell? Let me know, thanks FBBO!

Horns available?

Thanks for the reply! That looks like the one I have for my current 4 wheel drum set up. My research shows there are 2 main types of blocks used starting in the late 60’s through the 70’s. The rectangular shaped distribution block was for 4 wheel drum (also used on 1967-1970ish a bodies with...

Looking for a brake proportioning valve to complete the front disc conversion on my project. I know reproductions are available but would prefer a nice original part if possible. I believe most 71 and up A or B body with disc/drum would work. Let me know if you have a spare laying around that...

Found, thanks 4speed68rt!

Just missed the set listed here. Anyone else have a pair that they are not using and wouldn’t mind selling? I have a nice set of Mickey Thompson valve covers that I would be willing to put towards a trade. Thanks!

Cleared a few spots and sent a PM!

Looking for a decent set of big block Cal custom valve covers for my project. Let me know if you have an extra pair that you wouldn’t mind parting with! Thanks FABO!

Hi there. Looking for a core 727 big block trans in or close to California. Prefer a 1971 or later model, let me know if you have one laying around that you would like to sell! Thanks FBBO!